Regenerative BlowersProducts found: 11

Compressor World supplies the blowers for this category. Regenerative Blowers are used to move air in pressure or vacuum, suitable for handling house air to technical gases such as methan or biogas. The blower is a device used to move air and increase pressure/vacuum from a rotating impeller within a channel. - Compressor World

3BA HIGH PRESSURE REGENERATIVE BLOWERS

Airtech is a leading manufacturer of regenerative blowers. High pressure regenerative blowers manufactured by Airtech make up the 3BA series regenerative vacuum/pressure blowers. Our regenerative blowers are an ideal alternative to standard rotary vane pumps and PD/rotary lobe blowers. It’s innovative light weight and compact design adds to the ease of operation. 3BA regenerative blowers can quickly be added to your system with its easy to install close-coupled construction. The cool running outboard bearings increase service life. Free is a word that everyone likes to see when they are looking at a product, and this one is OIL FREE, MAINTENANCE FREE, and operates at an industry low dB(A) sound level. The 3BA has an operating capacity range of up to 1500 CFM and can achieve an end vacuum up to 20″ Hg or a pressure of 13 PSIG.

FPZ manufactures one of the most extensive line of blowers in the world. FPZ blowers feature cutting edge technology backed by our industry leading warranty
MS blowers feature airflows to 700 cfm and pressures to 7 psig. When pneumatic requirements can be met by MS blowers, these are generally the blowers of choice.

MD blowers are preferred when higher pressures are required with some models capable of over 10 psi. MD blowers are also ideal for applications that require a large turn down.

When high airflows are needed, TS blowers are the ideal choice with airflows twice those of MS blowers.

When a combination of high flow and high pressure is required,
TD blowers combine the flows of MS bowers with the pressures of MD blowers.
FPZ provides a wide range of blowers that feature Division 1 or Division 2 motors. Atex and other specialty motors can be supplied.

The operating principle of the DVP side channel blowers is simple: a small wings equipped rotor rotates inside a stator.

Small vortexes of air created by the centrifugal force and the rotation are dragged by the vanes from the aspiration toward the drain. There are no parts in contact, thus the blowers do not require routine maintenance but, since the intake air is also used as cooling fluid, they can operate continuously only within certain ranges of pressure. To prevent damage of the engine it is indeed necessary to install vacuum and pressure limiting valves.

All versions can be used as compressors. If used as a compressor, the output flow is clean and free of pulsations.